One Adjustable Rod Holder without the Aluminum Bar

It is not recommended to use the holder swivel bottom bolt as the mounting bolt as well. 

Swivel tension and mounting tension should be different. That is why the Aluminum Bar exists,

to be able to mount the holder securely and to give the ability to set the swivel left/right tension

plus to add height so the handle can be easily pulled out.   

   $30

__________________________________________________________  

One 1 1/4 inch Black Loop Only

One 1 1/4 inch wide loop for 1 inch diameter handles

$10

__________________________________________________________

 

 

One 1 1/2 inch Black Loop Only

 

One 1 1/2 inch wide all Black loop for 1 1/4 inch larger diameter handles

(not to be used with 1 inch diameter handles)

$10

_____________________________________________________________

Bee Ready Cap

Bee Ready Cap with Velcro closing in back......... $10

 

Adjustable Holder without the loop or bar

See Conversion kits click here

 

 

 

_____________________________________________________________

One Steel Bottom Grommet

 

 

 

To be used as the bottom grommet of an adjustable rod holder

 

$7

 

 

 

________________________________________________________________

Thumb Screw

   

For use with the floor base or Pontoon Mount

 $2.80

 

 

 

 

 

 

     

  

___________________________________________________________________

Bolt Gunwale Mount

These are free with purchase of a rod holder

$3.50

__________________________________________________________________

Lag Screw Gunwale Mount

These are free with purchase of a rod holder

$3.50

 

 

 

 

   

_________________________________________________________________  

Lag Screw Floor Base Hardware

These are free with purchase of a floor base

$3.50

 

 

     

  

_____________________________________________________________